Tips for regular maintenance and inspection of air spring

        Because of its many advantages and characteristics, air spring has been made into many different types of products. These products have entered all walks of life and have a positive impact on people’s quality of life. The relationship with people is getting closer and closer. People naturally care about the service life of air springs. If it can be used for a long time, there will be no problem. Natural and pleasant, but the service life of the air spring also depends on the quality of the selected product. And whether there is any accident during normal use.       

        First, in the daily use of air spring, we should pay attention to its use environment, including the temperature should be kept at – 10 to 50 degrees above zero, so that its humidity can not be greater than 25%. At the same time, dust or corrosive gas in the use environment will affect its use. In terms of the use environment, it should be noted that the power supply is usually 380V.


        Second, if you want to ensure that the performance of the air spring is good enough, you should pay attention to the cleaning of the impurity filter. If the daily use is more frequent or the use environment is bad or the packaging is debris, the frequency of cleaning the filter should be shortened. The daily cleaning frequency should be one to two months, and then shorten the frequency according to the situation.

        Third, it is also important to pay attention to the sanitary conditions of heating strips and silica gel strips, which are often damaged due to dirt attached to them. There is to pay attention to the paste on the heating rod, because it plays a very good insulation role, can effectively prevent the occurrence of short circuit.

Post time: Aug-20-2020